​An epoxy concrete floor coating can be the perfect solution for a durable floor that makes a beautiful first impression. Epoxy flooring is a flooring surface made up of multiple layers of epoxy applied to the floor to a depth of at least two millimeters.

The difference between an epoxy floor and an epoxy floor coating lies in the depth. Any epoxy floor less than two millimeters thick is known as a coating. Epoxy is made up of resins and hardeners. The resin and hardener are mixed together.

They chemically react, forming a rigid plastic material that is strong, resistant to degradation, and which bonds extremely well to its substrate. Epoxy floors are incredibly strong and can be used in the most demanding industrial environments as well as provide a beautiful addition to a regular trafficked floor.

​Demands of floors today are high. They need to be functional and efficient, making choosing a type of flooring difficult. Chemistry allowed for the development of high grade epoxy resin to upgrade surfaces, obtain colored effects, protect floors against corrosion, and achieve a water tight effect. All of these qualities provide longer durability of surfaces.

An epoxy floor coating is created when different individual components are combined to achieve a high grade, loadable, and long lived coating surface. The surface of the original floor must be prepared with a primer before being coated and sealed. The coating thickness and selection of coating system depends on application and surface.

Epoxy floor coatings are very reliable. They can meet today's stringent floor demands. The resins in epoxy can be adjusted according to the need to hardness and elasticity and developed specifically for the building and construction industry.

Safety and appearance is the most important. Repairing damaged buildings usually includes epoxy flooring to reestablish the functional condition while maintaining an investment. A company should select durable and decorative flooring at the same time.

Epoxy floor coating provides a sanitary and skid-proof surface even when wet. It is dust free and resistant to acids, suitable for any industry. Epoxy adheres well to surfaces made of concrete, metal, tiles, wood, and more. It has high resistance to abrasion and chemicals such as alkalis, gasoline, greases, thawing salts, and solvents. Adding colored silica makes the floor attractive.

There are long term benefits to epoxy coated patterns. They are easier to install, more durable, and have a lower cost of maintenance. It is slip coefficient, exceeding national standards for floor slippage. The film forming coating applied to the floor achieves a specified level of finished gloss.

Epoxy floor coating gives beautiful appearance that will hold up to wear and tear. They are an essential way to give a good impression to customers. Customers want the impression that detail matters to the company. Lack of care for a floor could give customers the wrong idea about commitment to getting professional results.

Old patterns do not need to be entirely replaced in order to look good. Epoxy floor coatings are a way to give a dramatic and professional first impression without the extreme expense of a new floor that will not be as durable as epoxy coating. No matter what state a floor is in, epoxy can give it an even, shiny appearance.
Not only will epoxy floors look better, they will also be a financially responsible move for business. A floor that is able to support daily traffic will need few repairs. Concrete hardeners create a denser surface that is resistant to scratches. Color can be added with the concrete polish to create a beautiful show room or a floor that reflects school colors.

​Concrete Restoration Inc. is the New England leader for high performance flooring. They cover Massachusetts, Connecticut, New Hampshire, Rhode Island, Vermont, Maine, and New York states. Concrete Restoration specializes in concrete floor preparation, durable seamless flooring, and high gloss polished concrete. They have a variety of flooring systems for a warehouse, store front, clean room, or processing area. Concrete Restoration offers epoxy floor coating, concrete floor finishes, and industrial floor coating. They even provide decorative flooring for the garage and basement. They also offer turnkey solutions and all the tools needed for a do-it-yourself installation or upkeep. Visit their website at [http://www.epoxyflooring-coating-concretepolishing.com/]
Article Source: https://EzineArticles.com/expert/Clarke_Patrick/1654008

Concrete floors in the Southeastern USA are porous surfaces which rapidly create dust, retain stains and are prone to cracking because of the wear of daily use. In an industrial environment, those weaknesses increase exponentially, creating potential perils for workers and users of these floors. Unless protected by the adequate coating materials, industrial floors not only become unsafe, but also deteriorate at a much faster rate. Lifetime Epoxy installs all types of industrial epoxy floor coatings. Here are the main advantages of installing their top quality floors.

The main advantage of industrial coatings is the general improvement of the floor condition and life cycle: they strengthen the floor surface, increase its resistance to abrasion, wear and chemicals, improve its appearance and ambience, and contribute to make it safer, eliminating hazard and danger areas, marking out guidance to fire exits or offering anti-slip protection. All of these features are of particular importance for commercial and leisure industries, where floors and facilities are open to the general public.

Other industries may also need anti-slip coating for their floors, along with other features available for industrial floor coatings such as resistance to extreme temperatures, pressure or chemical wash, high hygiene standards, dust-free preparation and easy maintenance, as seen in the case of food and beverage, and pharmaceutical industries. As advised by professionals on industrial flooring in the Southeastern USA., each type of industry has particular needs regarding the specific wear conditions their floors have to be able to endure; therefore, choosing the adequate material is essential to ensure the best performance and the lowest life cycle cost.

​Making the most of industrial floor coatings means choosing materials specially designed and engineered to withstand the particular abuse each type of industrial floor is subject to, be it chemical exposure, abrasion, impact or thermal shock. Apart from these four elements, there are other important aspects to consider when deciding on a certain coating material. Epoxy, for example, provides a tough, protective and very hard coating, with the additional advantages of being easy to clean and maintain, allowing to create differentiated areas with color and texture, being non-toxic and safe for the environment or providing anti-slip protection for workers and general users.

Coatings bonded directly to the surface of the concrete floor, such as Epoxy coatings, offer a long term protection, most of them including also an aesthetic value, very useful to certain industries. For the automotive industry, for example, Epoxy coatings offer a hard wearing, easy to clean solution with a high degree of slip resistance in greasy and wet environments, and the additional value of a decorative feature to reflect the colors of a corporate branding.

Offering high strength and resistance, hygiene and resin floor coating features, industrial floor coatings help businesses maintaining the highest safety standards
Article Source: https://EzineArticles.com/expert/James_Mcgillvray/1401376
Article Source: http://EzineArticles.com/7474432

Guest Author: By Jeremy Yarbro

The Huntsville-Madison market is full of ways you can enhance your garage floors. Garage floor coatings are numerous and there are many treatments to choose from. Some treatments are designed to improve the appearance while others add a protective layer. Choosing a product to coat the floors in your garage basically comes down to the type of look and function you wish to gain in the space. So many people completely forget about their garages until it is time to sell their home. A garage has one main function and that is to store items like your vehicles and lawn and garden equipment but it is common for a garage to become the catch all space in your home. Very few garages actually contain a car anymore and most are full of unused furniture, decorative items, and things you and your family no longer have a need for.

Changing how you use the space within your garage is fairly simple. It begins with removing the clutter and applying a new coating to the floors so the space looks cleaner and more inviting. Many homeowners are trying to add value to their homes at a time when most home values are depreciating. Fixing up your garage can also add function to one of the largest spaces within your home. A garage can easily be converted into a playroom or activity area for your family. Dads can use the garage to tackle some of those projects he has been meaning to do but just doesn't have the space to spread out and get done. Mom can use the space for her gardening or craft making.

Garage work spaces are easy to create and sometimes all it takes is the addition of shelving above a countertop area. Designating a separate area for each function you wish to allocate to the garage is a great way to make full use of all that extra space. Some homes have a laundry area in the garage or utility area. Other homes have large garages that can fit way more than just vehicles. When changing the function of your garage to incorporate other functions or utilities, it is highly important to treat the floor with a coating that is both beautiful and durable. Most floor treatments will leave your garage with a surface that is shiny and easy to clean and maintain. Some epoxy products are even strong enough to withstand chemical spills or acidic liquids. Other products are designed to reduce the moisture in the area so your garage flooring never cracks or deteriorates under the pressure of weight or with many years of frequent use.

Finding the right garage floor coatings that can best fit the overall need of your garage will take some time and investigating on your part. If you plan to do the work yourself, it is recommended that you follow the coating instructions fully. Some products are easy to mix and apply while others are best left to the professionals. Researching the different treatments that are available and determining which one will best work for your garage and family needs is recommended by most professionals. In order for the treatment to add value to your home it will need to be applied properly and intended to last for a long time. It must also enhance both the appearance and functionality of the space.

Check out the following recommended home improvement resources on garage floor coating tips and do-it-yourself garage flooring [http://garagefloorcoatingandflooring.com] ideas.
Copyright 2009 Jeremy Yarbro. Article Source: https://EzineArticles.com/expert/Jeremy_Yarbro/392796
Article Source: http://EzineArticles.com/2746448

By Guest Expert Author: Richard Alone  

Most Huntsville-Madison homeowners consider garage a wasteland. For most homeowners the garage is the black hole of their home's universe. Unwanted items from all other areas of the house are pulled in, stacked and forgotten until one day you open the door, look in and realize you can't see from one side to the other. But if you do little bit of work it can turn out to be an attractive and valuable space to spend your time and store some of your valuable possessions. Many homeowners store all their valuable possessions like ATV's prized automobiles in this less prime condition.

You can make your garage attractive by installing garage coatings. Such type of coatings will protect your garage floor and look great at the same time. If this part of your house looks good, you're more likely to keep the rest of it organized and in good shape.

One main reason why homeowners do coating in garage is due to its sharp appearance. Garage Floor coatings are available in many different colors and textures to give it more traction and a classier appearance. Another advantage of taking up garage coating is because they extend the life of your garage floor. Most are made up of a high-grade epoxy which repels water, oil and other materials, resisting the contaminants that eat away at your floor and eventually cause it to fail. Most auto shops have attractive garages due to garage floor coatings.

Various types of garage floor coatings are available in the market but the most popular ones are epoxy systems. Do make sure that your floor is in the right shape for the paint to take. One of the best ways to test it is to pour some water on the floor and see if it soaks in or beads up. If you see it is still sitting there after a few minutes, you have to treat your concrete with a sealer and you can break that down or etch it before you apply the coating. You have to purchase a special concrete etching solution that breaks down the sealer and your floor is ready for final application. After that, make sure your floor is as clean as possible before starting the job.

Many people use coatings to protect their floor from harmful chemicals, destructive scratches and mechanical shock due to cleaning equipment. Different types of garage floor coatings are available in the market like epoxy, polyurethane, acrylic sealer and latex. Many homeowners use polyurethane coating as it can resist chemical pills. This coating does not fade off easily. You have to first apply epoxy paint on the floor and then use polyurethane coating on the floor. However, latex paint can fade easily as they are exposed to sun and so it is advisable to apply a protective coating over it.


Richard is an Expert author for metal coatings [http://www.asc-tx.com/] and Acrylic coatings. He has written many articles like leather coatings [http://www.asc-tx.com/xtreme_leather_coatings.html], garage floor coatings and WaterBorne Trailer Coating.rticle Source: https://EzineArticles.com/expert/Richard_Alone/354825Article Source: http://EzineArticles.com/5988894

By  Lifetime Epoxy Expert Guest Author: Jorge Ramos 

Lifetime Epoxy is one of the largest epoxy flooring installation companies in the Southeast. Their selland install an abundance of resin floors in Huntsville, Madison, Decatur, Athens and all over North Alabama. Here is an article clearly explaining how our customers should clean and maintain their new epoxy floor.

Concrete usually takes the most abuse of any surface in the building. Floor maintenance is a process which is dependent upon the type of dirt and debris to which it is exposed, and the traffic conditions. However, like most surfaces, the condition your epoxy floor is kept, the longer it will last. Fine particles of dirt and grit are abrasive, so regular maintenance is crucial to your floor's longevity. Here in this article, we have covered few essential tips to make your place sparkle and look clean as a whistle. There are ways to clean your place easily and make it a job you will enjoy doing.
​
Surface Preparation
Make sure that you remove dirt, dust, and debris from epoxy floors. Clearing everything out of the concrete is a key to ending up with a high-quality epoxy-coated garage floor. Set aside a whole day for this job. Clean and degrease the concrete with a cleaner. It cuts through grease and grime easily. You can use it just about anywhere. It will make everything sparkle and shine in your office and home. Remove any trace of oil and allow the cleaner to sit for 2-3 minutes before scrubbing with a bristle brush. You must also rinse your floor at least twice to ensure it is free from grubby remnants of solids and contaminants. Let it dry completely.

Grease and Oil-stained Special Attention
Areas that have been greased should be cleaned at least twice with degreaser. It is preferable to apply hot water to the surface. If that may be enough to get rid of the surface from grease and oil even, you may need to use grit blaster.

Professional Help for Large Applications
One can apply an epoxy coating to smaller applications with the aid of helper. However, for large jobs, a commercial flooring expert with an experienced team can get the job done quickly and efficiently.

Different Types of Dirt Require Different Cleaners
Some dirt and contaminants, like fats and oils, respond to alkaline-type cleaners while, some dirt and contaminants, like rust and minerals, respond to acidic-type cleaners. So, two separate cleanings may be required for the different types of dirt, followed by a good scrub rinse to stop the chemical action.
​
Not-to-Apply Soap
You should never use soap on epoxy floors. If you use soap, it will leave a film behind on the floor. This film can become very slippery when it is combined with water. Therefore, you should never use soapy water to clean epoxy floors.

Shield Your Epoxy Flooring From Too Much UV Rays
Epoxy coatings will fade a bit in excess ultra-violet rays, while other coatings tend to get brittle and crack. There are sealants available to help protect your floor coating from sun damage and, at the same time. You may need to reapply sealants every couple years to make your epoxy coatings strong and beautiful.

When you clean your floor you get a sense of pride that your place is pleasant to look at and that it is a clean for you and your family to live in. It also gives a sense of accomplishment. You always get people saying how you keep your epoxy flooring so neat and clean. Well you can give them a few tips on how you can keep a clean household and how to keep everything in its place. These are just a few ways to help keep your household in order and cleaner for you, your family and guest.
​
Outstanding Floor Group LLC offers exceptional services for all type industrial, commercial and retail concrete flooring. More to know about Concrete Stained Flooring and Concrete Stained Floor please contact us outstandingfloorgroup Epoxy Flooring Florida @ 1-866-812-9319.
Article Source: https://EzineArticles.com/expert/Jorge_Ramos/404686
Article Source: http://EzineArticles.com/4526802

By Guest Author:  Harvey Chichester 

In today's Alabama's competitive environment, factories and other production facilities need to operate around the clock in order to maximize the use of the company's resources. But heavy usage means increased damage to the plant floor since even the hardest cement deteriorates under constant friction. With floor damage comes difficulty in cleaning, maintaining rolling equipment, and presenting a positive corporate image. Shutting down the plant would be too costly to the business operations, so the damage must be repaired on the fly--and it must last. This is where a new breed of wear-resistant and easy-to-use epoxy patches and laminating products can save the day.

Even more difficult than maintaining clean, smooth floors with out chipping, lifting, or pealing, is fixing holes, cracks, and erosion. Some facilities suffer from shaking concrete floors. The shaking is most often caused by rolling equipment crossing expansion joints cut in the concrete when poured. All these problems can be remedied with 100% epoxy fillers mixed with quartz that can be feathered to blend with the surrounding undamaged surfaces. With some careful preparation, and the use of grinders, the damaged floor can be brought back to level quickly and without interruption to operations. The patching materials have compression strengths exceeding 22,000 lb. per sq. in., can be feathered to a fine edge, and will not wash or knock out of the holes and cracks that they fill.

Mixing 100% epoxy with color quartz to 28 lb. per gallon gives a trowel mix with a peanut butter consistency. This mix can be placed in holes using a trowel or putty knife. Small vertical surfaces are best filled by using a heavy rubber glove and applying the mixture by hand with a rubbing motion. Small holes can be quickly filled simply by pouring syrup-consistency liquid epoxy to the surface and grinding flush once hardened. Uneven surfaces can be matched by bridging from the higher surface to the lower surface with a trawled-on mini-ramp that transitions from one level to the other.

Photo examples of the joint sealing process are available at www.concrete-floor-coatings.com/photos/jointsealer. They are provided by Durall Industrial Flooring of Minneapolis, MN, the only industrial flooring manufacturer that also makes over 500 specialty cleaners, allowing them to produce special preparations and application systems designed to assure optimum flooring adhesion and wear results.

For more information, contact Harvey Chichester at harvey@concrete-floor-coatings.com
Phone: 1-800-466-8910 or 952-888-1488 (24/7)

###
Harvey Chichester is a principal of Durall Industrial Flooring, a company with more than 40 years experience in developing special flow-coatings for industrial and residential floors. He has experience with Automotive and shopping centers, breweries, food processing plants, manufacturing plants, airplane hangars, car washes, kennels, warehouses, printing plants, residential basements, pool decks, and condominiums are among some of the facilities that benefit from these non-porous, moisture- and wear-resistant cement floor coverings.
Article Source: https://EzineArticles.com/expert/Harvey_Chichester/23839Article Source: http://EzineArticles.com/162993

Lifetime Epoxy Floors is Alabama's most trusted name in industrial. commercial and residential epoxy flooring installs. Call 1-800-214-4311 for a free quote.

By  Lifetime Epoxy Expert Guest Author: Renee K Mirabito
​
An epoxy floor coating will likely be applied if you are considering a polished concrete floor, designer floor, or other specialised finish. Epoxy is a clear resin with a high level of hardness, which both seals and protects concrete, and other surfaces. This makes the surface non-slip, hygienic, waterproof, durable, and also achieves an attractive high-gloss finish.

What is an Epoxy Floor Coating?

Epoxy is a two-part polymer which is formed by combining an epoxide resin with a polyamine hardener. When the two are mixed, what we usually refer to as epoxy resin is formed. Epoxy has a wide range of commercial and industrial applications, which extend far beyond flooring.

Epoxy is used to seal, protect, and harden concrete floors, as well as other surfaces such as floorboards. In commercial and industrial settings, epoxy is used to help make floors more durable. Epoxy can also be used to protect surfaces from graffiti. Its waterproof and dust proof qualities make it a hygienic choice of floor covering. It can create a food-grade surface which is preferred by the hospitality industry, and is also suitable for wet areas such as kitchens and toilets.

There are many different grades of epoxy coatings available, which are designed for different applications. For instance, the choice of epoxy for a domestic home would be different than that of a commercial space. There are also different choices available which can alter the finished look of a floor.

How is Epoxy Applied?

Before an epoxy floor coating can be applied, the surface beneath must first be prepared. Concrete surfaces will be diamond ground, exposing the desired amount of aggregate for the right finish. Epoxy is also used to correct uneven floor surfaces.

Epoxy is mixed on site and applied to the floor surface. Depending on climate, it usually sets and can be walked on within 24 hours. Some heavy-duty epoxy coatings can take longer, depending on the mix and thickness. For polished concrete floors the surface can be ground again and resealed, for an even better result.

What Kind of Finish Will be Achieved?

The type of finish will depend on the type of floor surface beneath. Epoxy resin is clear, and will add a glossy overcoat to the existing floor. When choosing your epoxy resin, high gloss and semi gloss options are available.

What is Epoxy Like to Live With?

Epoxy floor coatings create a gloss finish which reflect the light and make spaces seem big and airy. Dust and dirt will settle on the floor surface, and can be quickly and easily cleaned up, also a great benefit for allergy sufferers. It's low-maintenance, and also quiet. There are no noisy footsteps or echos.

Epoxy resin coatings also work well in workplaces. Clean ups are quick and easy, and there is little concern about spills and stains.

For a floor that is attractive, durable, and easy to maintain, consider the application of an epoxy floor coating in your home, office, or factory.

Concrete Resurfacing Systems offers quality solutions for polished concrete, concrete restoration, protective, and decorative flooring in Melbourne, Australia. If you are interested in learning more about polished concrete Melbourne, please take a look at our website, or call direct on 1300 13 90 92.
Article Source: https://EzineArticles.com/expert/Renee_K_Mirabito/799208
Article Source: http://EzineArticles.com/5208375

By Guest Expert Author:  Tom Turner 

Industrial flooring is one flooring surface that must be thought about with great consideration before making a decision. If you have any local factories that have recently had a new industrial flooring surface installed you are at an advantage to see what and who they used for the job. If you are not so lucky then you need to take some notes.

One thing that can make your industrial flooring installation expensive is the cost for repairs to the cement flooring before they can install your new flooring. The most common industrial surfaces use will be epoxy material. These types of industrial flooring surfaces must be prepared with careful consideration before applying the actual epoxy flooring.

If you have a larger company you may have maintenance people who could do the repairs before the actual work is done. You should consult with companies that will be doing to the work before spending time and money on repairs to see if this is acceptable. This is not always an option as many industrial flooring companies know what they are doing and will only install their flooring on surfaces they have prepared themselves.

Make sure that your industrial flooring has a solid warranty and come from a reputable company. Saving money will usually end up costing you money in the long run when it comes to these types of flooring surfaces. Industrial flooring is one that is very difficult to save pennies on.

You will find that epoxy industrial flooring is nearly four times stronger than concrete and will make your floor last a very long time. If you keep care of the flooring you can have it resurfaced at a very reasonable rate compared to a brand new installation.

For more information on flooring try visiting [http://flooring-solution.com] a website that specializes in providing helpful flooring tips, advice and resources to include Industrial Flooring [http://www.flooring-solution.com/industrial-flooring.php] and more.
Article Source: https://EzineArticles.com/expert/Tom_Turner/63997
Article Source: http://EzineArticles.com/750877

1. Strength is an option
This kind of resin floor is just up to 7 times stronger as well as more durable rather than concrete. It also upsurges the longevity of your parquet and greatly decreases the costly repairs. Installing it on your house, you will be able to protect it from the outer harm.

2. This is absolutely waterproof
Epoxy Floors is absolutely nonporous. Thus this is impervious to the water and some other fluids. It also makes your house and the terrazzo resistant to the ultimate growth of molds, mildews, as well as fungus. You do not have to worry about the rain; it will be protected from the rain easily.
​
3. Chemical and Acid Resistant
This specific base is absolutely resistant to the chemicals and acid. As a matter of fact, they will not damage, discolor, or even stain it by any chance. Installing it in your house, you can easily protect it from some outer pollution as well as outer stuff.

​4. Texture is also there
Very heavily or smooth textured floors can easily both be created using this kind of flooring only depending upon the ultimate requirements of each and every facility. The heavy texture creates the non-slip flooring. Containing some beautiful texture, you can easily install it in your house.

5. Seamless and perfect
This kind of terrazzo easily can be installed as the seamless floor. The seamless flooring is actually recommended as well as approved by the USDA, FDA and other governing bodies. This kind of material is absolutely seamless and perfect.
​
6. Low maintenance
The specific flooring is absolutely easy to clean. It can be cleaned as well as disinfected swiftly reducing the ultimate cost of the daily maintenance. When an individual is opting for some kind of low maintenance stuff for their surface, then it can be the finest thing for the home.

​For more details visit us: https://www.cisneroscustomcoatings.com/
Luis Cisneros is a professional writer in the fields of concrete and flooring design work ideas and finding the best dealers for a Floor design. He also enjoys blogging about concrete flooring work planning, in general, covering various needs and another informative post about home decoration and design.
Article Source: https://EzineArticles.com/expert/Luis_Cisneros/2303919 Article Source: http://EzineArticles.com/9785256